The CC-PUIO31 51454220-176 universal input output module interfaces with analog input, analog output, digital input, and digital output field devices.
Marca :
HoneywellNúmero de pieza :
CC-PUIO31 51454220-176Descripción :
Universal I/O ModuleOrigen :
ChinaCondición :
NewDimensión :
145 mm x 165.1 mm x 72.4 mmPeso :
0.66 kgPago :
Bank Transfer
Honeywell CC-PUIO31 51454220-176 Universal I/O Module
The CC-PUIO31 is a Universal I/O Module, manufactured and designed by Honeywell as part of UIO-2 Module belong to Series C I/O used in Experion PKS control system.
The Experion Series C I/O modules are an expanding family of traditional and special function input/output signal interface devices. They supports local software configuration. These I/O modules share the same form factor as the C300 Controller and reside on the same type of common mounting system as other Series C components.
Series C I/O Modules, along with I/O Termination Assemblies (IOTAs), perform module diagnostics input and output scanning and processing on all field I/O data and events. To allow a more efficient use of Controller resources, I/O processing is performed separately from control processing functions so that:
• I/O sample rates are completely independent of I/O quantity, controller loading, processing, and alarming
• allows more efficient use of advanced Control Processor capability, and
• provides for future I/O expansion.
The UIO (CC-PUIO31) module is introduced with R432 and has 32 configurable input or output channels that are identical to the UIO (CC-PUIO01) module.
Notable Features
• Each channel user configurable as:
- Analog Input
- Analog Output
- Digital Input
- DISOE - Sequence of Events (1ms resolution SOE, 20ms PV scan)
- Digital Output
- Pulse Input (any four channels)
• Open Wire Detection
• Electronic short circuit protection1
• Fast Scan (Priority I/O Module Scan)
• Safe-state (FAILOPT) behaviors configurable on a per channel basis for Digital / Analog Output
• HART 7 support (Analog I/O)
• HART Modem per Channel for Fast Performance
• Extended Temperature Range -40 to +70°C module ambient
Detail Specifications – Analog Input
| Parameter | Specification |
| Input type | Current (2, 3, or 4 wire devices) |
| Input Channels | 32 Maximum per module (with or without open wire detect) |
| A/D Converter Resolution | 16 bit |
| Input Range | 0-20 mA or 4-20 mA |
| Normal Mode Rejection Ratio | 18 dB at 50 Hz, 20 dB at 60 Hz |
| Input Filter Response | Single pole, -3dB @ 6 Hz |
| Crosstalk, dc to 60 Hz (channel-to-channel) | 60 dB |
| Input Impedance | 250 Ω |
| Input Voltage Range (any input referenced to common, no damage) |
+33 VDC to -1 VDC (1) |
| Input Scan Rate | 10 ms |
| Hardware accuracy | 0.1% of full-scale (23.5 ± 2°C) 0.175% of full-scale (0 to +70°C) 0.25% of full-scale (-40 to +70°C) |
| Short Circuit Current Limit | 25 mA |
Detail Specifications – Analog Output with HART
| Parameter | Specification |
| Output Type | 4-20 mA |
| Output Channels | 32 Maximum per module^2 |
| Output Temperature Drift | 0.007% of Full Scale/°C |
| Output Readback Diagnostic | ± 4% of Full Scale |
| Output Current Linearity | ± 0.05% of Full Scale (nominal) |
| Resolution | 12 bit |
| Calibrated Accuracy | < 0.35% of Full Scale (25oC) including linearity |
| Directly Settable Output Current Range | 0 mA, 2.9 mA to 21.1 mA |
| Maximum Resistive Load (24 V supply) | 825 ohms @ 20 mA |
| Maximum Output Compliant Voltage (24 V supply) |
16.5 VDC @ 20 mA |
| Open Circuit Voltage | Supply Voltage (26 VDC maximum) |
| Response Time, DAC input code to output (within 3% of final value) |
80 ms in HART mode 0.25 ms in non-HART mode |
| Gap (0 mA) of Output to Field on Switchover | 0 ms (both partners continuously active) |
100% brand new and original,All the goods will be tested before shipment.
For the in stock items, we will send the order out within 5-7 days after receive the payment.
Global supplier of quality automation and control components.
Topteng offers a 12-month warranty from the date of delivery.
In the event of non-conforming product ( if damaged or incorrect product is received ),
Any nonconformity must be reported within 7 days of receipt of goods.
Questions? Call +86 18050017653 or Email sales4@nseauto.com
¡Realmente es una experiencia agradable cuando puedes encontrar algo nuevo y obtener un excelente precio! Definitivamente compraré de nuevo.
Muy buen vendedor productos iguales a los descritos en muy buen embalaje y corto tiempo de entrega.
Respuesta muy rápida a mis solicitudes de cotización y el producto se envía rápidamente.
La calidad del producto superó mis expectativas.
La atención al cliente fue excepcional.
Continúe leyendo, manténgase informado, suscríbase y le invitamos a que nos cuente lo que piensa.
Información social
WhatsApp : +8618050017653
RED SOPORTADA
